Step 1: Deleted all “tws-i9s” from your phone’s Bluetooth list, then press and hold down the multifunction button on two earphones at the same time until the indicator blinks blue and red alternately, you will hear a voice.
Beside above, how do I reset my i9 earbuds? From OFF status, press & hold the power button for about 15 seconds, LED will light on BLUE once then no LED light for about 7-10 seconds, at last it will flash BLUE & RED simultaneously (looks PINK) twice. Then it will power off along with the LED turns off. Step 3: Pair both RIGHT and LEFT earbuds.
Correspondingly, how do I reset my TWS earbuds? Remove earbuds from case and hold down buttons for a few seconds until they shut off. Starting with earbuds in the OFF position hold down buttons on both earbuds for around 10 seconds. The LEDs will blink Red and White 3 times. This will reset your earbuds.
Likewise, why won’t my i9s TWS connect? Make sure that you select the devices connected via Bluetooth is your earbuds instead of the other device. Make sure that the Bluetooth module is working on your phone. … If the phone is not paired, only one headphone is connected or the i9s TWS earbuds does not give voice commands, restart the earbuds.
Moreover, how do I pair my i9s? Take the left and right earbuds out the case and long press the touch control area at the same time for about 3 seconds or until you see a white LED light flashing on both earbuds. It is very important that you long press the left and right earbud at the same time.
How do you reset wireless earbuds?
The typical procedure of resetting earbuds like these is 1) Place the earbuds in the charging case and leave the case lid open, and 2) Press & Hold the button on the charging case for 10+ seconds, you should then see a change on the indicator light on the charging case that indicates a successful reset.
How do I reset my s11 TWS?
Step 1: While the headphones are charging (the white LED indicator of earbuds is on), double-press the power keys of both sides to reset the headphones. Remove both the headphones from charging case, then both headphones power on automatically and connect each other within 60 seconds.
Why is only one of my earbuds working?
Headsets may play only in one ear depending on your audio settings. So check your audio properties and make sure that the mono option is turned off. In addition, make sure that voice levels are balanced on both earbuds. … The voice levels must be equal on both sides of your headset.
How do you pair F9 earbuds together?
Take out any one of two earbuds, the LED indicator will flash white light. Then Double-tap the Touchpad, the LED indicator will start flashing white and blue alternately. Turn on the Bluetooth on your phone and erase the previous pairing record of ‘F9’. Now search ‘F9’ and start pairing.
How do I sync my i9s TWS?
How do I check my i9s TWS battery?
Supports both iOS and Android) When the i9 TWS is connected to the mobile phone device, the current power of the earbuds can be displayed in real time on the upper right corner of the phone. When the headset is low in power, the power symbol is displayed in red, prompting the user to charge the headset.
How do I connect to i9s TWS?
How long do i9s battery last?
1- Bluetooth version: 5.0, easily connected with devices 10-15 meters away. 2- Earpods with a good battery, better performance to keep stereo sound. 3- Higher Capacity Battery: Earpods: pure cobalt 45 mAh, charge base: 300 mAh, total playing 5-6 hours. 4- Compatible with all Bluetooth devices.
How do you pair fake Airpods?
How do I connect my i9s Airpods to my laptop?
How do I reset sudio TOLV?
Start the earphones again by pressing and holding both sides for thirteen seconds, until the lights stop blinking. 2. Put the earphones back in the case and wait for 10 seconds. They are now reset.
