How to boot hard on imac?

1. Connect the external drive or device to the Mac.
2. Reboot the Mac and after the startup chime hold down the OPTION key during boot until you see the boot selection menu.
3. Click the external volume to boot from it.

Additionally, how do I do a hard reboot on my imac? How to Force Restart Your Mac. Press and hold down the Command (⌘) and Control (Ctrl) keys along with the power button (or the ‌Touch ID‌ / Eject button, depending on the Mac model) until the screen goes blank and the machine restarts.

People ask also, how do I boot my Mac in hard drive mode? To enter Target Disk Mode, click the Apple menu and select System Preferences. Click the “Startup Disk” icon and click the Target Disk Mode button to restart your Mac in Target Disk Mode. You can also enter Target Disk Mode by rebooting your Mac and holding down the T key as it boots.

Also the question is, how do I boot my Mac that won’t boot up? Hold down all of these keys: Command, Option (Alt), P and R, and turn on the Mac (it’s the same keys to reset the PRAM). Keep holding the keys down until you hear the Mac restart again. Listen for a second reboot, and then release the keys.

Amazingly, how do I boot my Mac into recovery mode?

1. Click on Apple logo at the top left of the screen.
2. Select Restart.
3. Immediately hold down the Command and R keys until you see an Apple logo or spinning globe.

Control–Power button* or Control–Media Eject : Display a dialog asking whether you want to restart, sleep, or shut down. Control–Command–Power button:* Force your Mac to restart, without prompting to save any open and unsaved documents.

How do I choose what operating system my Mac is on at startup?

If you’re using a Mac notebook computer with an external keyboard, make sure you press and hold the Option key on the built-in keyboard. in the right side of the taskbar, click the Boot Camp icon , then choose Restart in macOS. This also sets the default operating system to macOS.

How do I start my iMac in target mode?

How do I restore factory settings on my MacBook air?

1. Hold down the Command and R keys on the keyboard and turn on the Mac.
2. Select your language and continue.
3. Choose Disk Utility and click Continue.
4. Choose your startup disk (named Macintosh HD by default) from the sidebar and click the Erase button.

How can I turn my iMac on without the power button?

If your Mac does not appear to have a power button, it may be a newer model. Press and hold the Touch ID sensor, which is the upper-rightmost “key” on the keyboard. On Touch Bar compatible MacBooks, it is at the very right side of the Touch Bar.

How do you clear pram on a Mac?

1. Shut down the computer.
2. Press the power button.
3. Immediately after, press Command, Option, P, and R all at the same time on the keyboard.
4. Hold these keys down until you hear the Mac’s startup sound for a second time (the first was after the initial press of the power button).
5. Release all of the keys.

How do I boot into recovery mode?

Keep holding the volume up button until you see the bootloader options. Now scroll through the various options using the volume buttons till you see ‘Recovery Mode’ and then press the power button to select it. You’ll now see an Android robot on your screen.

How do I enter recovery mode?

Press and hold the Volume Down and Power buttons simultaneously until the device turns on. You can use Volume Down to highlight Recovery Mode and the Power button to select it. Depending on your model, you may then have to enter your password and choose a language to enter recovery mode.

How do you know if your Mac is in safe mode?

1. Click on the Apple logo in the menu (top left).
2. Click in About This Mac.
3. Click on System Report.
4. Click on Software and check what the Boot Mode is listed as – it will say Safe if you are in Safe Mode, otherwise it will say Normal.

What do I do when my IMAC freezes on startup?

Press and hold the power button on your Mac for up to 10 seconds, until your Mac turns off. Then turn your Mac back on. If the issue persists, press and hold the power button until your Mac turns off. Then unplug all accessories from your Mac, including printers, drives, USB hubs, and other nonessential devices.

Why is my Mac not responding?

Reboot your Mac If you can’t Force Quit an unresponsive application, then it’s time for a reboot. … How to reboot a Mac that is not responding: Hold down the power button for several seconds. If that doesn’t work, Press the Control-Command keys down, then press the Power button.

How do you restart a Mac desktop?

1. Press the power button (or press Control+Eject) and, when a dialog box appears, click the Restart button.
2. Choose the Apple key and then click Restart.
3. Press Control+Command+Eject (or Control+Command+Power button).