How to fix dvd player on macbook pro?

1. Click the Applications folder icon on your Mac’s Dock.
2. Scroll through the applications until you locate the DVD Player icon.
3. Click the DVD Player icon to load the application.
4. Click the Finder icon in the Mac dock.
5. Enter “dvd player” into the search field.

Beside above, why is my macbook pro DVD player not working? DVD not be recognized/read usually happens when you insert DVD disc improperly, have a damaged disc or DVD drive, or your DVD drive driver goes outdated. For that, you can repair or buy a new DVD drive, or reset NVRAM (or PRAM) via press and hold the Command-Option-P-R keys to shut down your computer and turn on later.

Also know, how do you reset a DVD drive on a Mac? RESET OPTICAL DRIVE Once the machine is powered off, hold the left mouse button down and re-power your iMac. Keep the mouse button held down until you reach the login window. You should hear the optical drive perform one full eject cycle.

Moreover, how can I make my Mac DVD player region free? The solution is use VLC (Video LAN Client) instead of Apple’s DVD Player. To make this work you must go into System Preferences for DVD Movie and either set VLC as the default application or set it to ignore. This will cause OS X to think of the non-Region 1 DVD as a data disk and mount it in the Finder.

Best answer for this question, how do I reset the USB ports on my Mac laptop?

1. Shut down your MacBook.
2. Press and hold Shift-Control-Option.
3. Press the Power button while holding all three keys.
4. Hold the keys for 7 seconds.
5. Release all the keys at the same time.
6. Boot up your Mac as usual, and the SMC will be reset.

Why is my Mac rejecting dvds?

Over time a drive’s lens may collect dust and debris, which can prevent the lens from reading properly. If this happens then most discs inserted into the drive will be ejected, including commercial discs. To remedy this, you can try blowing compressed air into the drive in an attempt to dislodge any debris on the lens.

How do you reset the SMC on a MacBook Pro?

1. Choose Apple menu > Shut Down and wait for your Mac to shut down.
2. Unplug the power cord.
3. Wait 15 seconds.
4. Plug the power cord back in.
5. Wait 5 seconds, then press the power button again to turn on your Mac.

How do I play a DVD on my MacBook Pro 2010?

Playing a DVD on a Mac is extremely simple. Just insert the DVD into your Super DVD drive (Super DVD drive is Apple’s optical disc reading and writing technology). The DVD player will open automatically and start playing the disc. You can open it using the Menu and click Play to run the movie.

How do you reset the PRAM on a Macbook Pro?

Shut down your Mac, then turn it on and immediately press and hold these four keys together: Option, Command, P, and R. You can release the keys after about 20 seconds, during which your Mac might appear to restart. On Mac computers that play a startup sound, you can release the keys after the second startup sound.

How do you reset a DVD drive?

1. Restart your computer. After it starts to back up, push the eject button on the DVD player if it was not working properly.
2. Find a small opening below the eject button on the outside of the drive.
3. Clean the laser lens on the DVD drive with the appropriate cleaner and a lint-free cloth.

How do you force eject on a Mac?

1. Restart your computer, and hold down the mouse button. If you have a 2 button mouse, hold down the left click.
2. If your computer has an eject key on the keyboard, restart the computer again, this time holding the eject key.
3. Open a Terminal window and type in drutil tray eject.

How do you change the region on a DVD player?

In the Device Manager window, double-click the DVD/CDROM drives icon. In the Device Properties window, click to select the DVD Region tab. In the DVD Region window, click to select the appropriate region code. Click the OK button.

Can you change the region on a DVD?

If your DVD drive has an incorrect region code for your area, you may be able to change the region setting of your DVD drive to match your DVD. … With most DVD drives, you can change region settings only a limited number of times before the region setting becomes locked permanently.

How do I change the region on my Mac DVD player?

1. Insert the DVD into the optical drive on your MacBook Pro.
2. Consult the DVD package to verify which region code to use.
3. Click the “Change Drive Region to” drop-down menu, and then click the region code.
4. Click “Set Drive Region.”
5. Click on the “Lock” icon to save your settings.

How do I get my MacBook Pro to recognize my USB?

Open System Information and disconnect the USB device from your computer. Wait a few minutes, and click File > Refresh Information. Reconnect the USB device. You should see a device disappear from System Information when you remove the USB device, and it should appear again when you reconnect it.

How do I get my MacBook to recognize my USB?

1. Click the Apple logo and click “Restart” to reboot your Mac laptop.
2. Unplug connected USB devices if the ports are still not working.