How to pair sound mates airpods?

Enable your device’s Bluetooth function from your device’s Settings menu. Select “Tzumi Soundmates” from the Bluetooth device list to pair the earbuds to your device. If your Soundmates won’t pair to each other, place them back in the charging case. When you remove them from the case again, they will auto-pair.

You asked, how do you pair sound mates wireless earbuds? FIRST – Press and hold the multi-function button on both earbuds until you hear a prompt to “Power On”. You will then hear the prompt “Pairing”. You will hear 2 chimes* indicating that both earbuds are ready to pair. SECOND – Select ‘Tzumi Sound Mates‘ from your device’s Bluetooth display list.

Beside above, how do you connect sound mates together?

Likewise, how do you get both Tzumi earbuds to work?

1. Press and hold BOTH earbuds until you hear the pairing Prompt in BOTH ears.
2. Select ONLY ONE Tzumi Soundmates in the Bluetooth options on the device. IF YOU SEE TWO OPTIONS YOU MAY HAVE TO REPEAT THE PROCESS OVER AGAIN.
3. Once device confirms Device Connected You should hear in both ears. Hope this helps.

Also, how do you pair Tzumi sound mates without buttons?

1. Turn off Bluetooth on your phone.
2. Set both pods on table for 5 min to make sure they turn off.
3. Put pods back in the case.
4. Turn on Bluetooth and scan to remove any instance of tzumi.
5. Remove whichever pod was flashing red/blue.
6. Should connect.
7. Remove other pod.

Headsets may play only in one ear depending on your audio settings. So check your audio properties and make sure that the mono option is turned off. In addition, make sure that voice levels are balanced on both earbuds. … The voice levels must be equal on both sides of your headset.

Why is only one of my earbuds working?

On your device, go to Settings and looks for Sound or Audio settings. There you will see an option for Mono Sound or Mono Audio. Make sure you disable it and then recheck the audio on your headphones. In some devices, the option for Mono Audio could be under Ease of Access options.

How do you pair both Tzumi Probuds?

PAIRING BOTH EARBUDS Press and hold the multi-function button on both earbuds for a few seconds until you hear prompt “Power On” or see blue lights flashing. You will hear prompts, “Left Channel on Left Earbud and “Right Channel” on Right Earbud to begin pairing.

How do you get Probuds to work at the same time?

This is what I do and no longer have any issues with pairing. – put both earbuds in your ear – press both buttons at the same time until you hear power on for both. Then press and hold one of the earbuds for a couple of seconds – you will hear left or right channel message.

How long do sound mates last?

Tzumi Sound Mates : The batteries only last about 2 hours.

How do you pair left and right earbuds?

Take the left and right earbuds out the case and long press the touch control area at the same time for about 3 seconds or until you see a white LED light flashing on both earbuds. It is very important that you long press the left and right earbud at the same time.

How do you pair both Tzumi Bluetooth earbuds?

Enable your device’s Bluetooth function from your device’s Settings menu. Select “Tzumi Soundmates” from the Bluetooth device list to pair the earbuds to your device. If your Soundmates won’t pair to each other, place them back in the charging case. When you remove them from the case again, they will auto-pair.

How do you fix wireless earbuds when only one works?

1. Check the side balance.
2. Check Your Track Mono Or Stereo.
3. Power off/on your headphone.
4. Reconnect Bluetooth.
5. Insert the sound cable plug while playing audio.
6. Pull out back the sound cable while playing audio.

How do I turn on Tzumi Probuds?

Go to settings and then tap Connections. In Connections window, press Bluetooth. Under ‘Available devices’, when your Tzumi Bluetooth device appears, tap on it and then your Android device will be connected to your headphones.

How do I reset my Tzumi Probuds?

To reset/change MASTER Earbud, hold multi-function button on BOTH earbuds for 6 seconds. When blue/red lights flash quickly, press multi-function button twice on the earbud you want to set as the MASTER Earbud.

How do I turn up the volume on my Tzumi Probuds?

1. Increase volume: Press the multi-function button 2 times consecutively, holding the button down at the second push ( ).
2. Decrease volume: Press the multi-function button 3 times consecutively, holding the button down at the third push ( ).

How do you fix a quiet earbud?

1. Tap settings.
2. General.
3. Accessibility.
4. Move down to the hearing section.
5. Ensure the balance for the left and right buds is in the middle.