How to tell what wifi network homepod is on?

1. On either the Home or Rooms tab, tap and hold the icon for your HomePod.
2. Tap Settings at the bottom of the next screen.
3. Now on the settings screen, scroll to the very bottom. You should see Wi-Fi Address; tap it and your Wi-Fi Network will display.

Also know, how do I change Wi-Fi on HomePod? Tap and hold or 3D Touch the HomePod icon for the specific HomePod you’re having issues with. At the top a message will appear that says “This HomePod is on a different Wi-Fi network than this iPhone. Move HomePod to ‘(Wi-Fi name)’”. Give it a few seconds and HomePod will automatically connect to the new Wi-Fi network.

Additionally, how do I know what network my Wi-Fi is on? The first, and the most reliable, is to go to your router and look for the card that identifies your network name and password. This may just be a sticker on the router itself that has this information printed on it, just in case the removable card gets lost (BT routers and powerline adapters have these, for example).

Frequent question, why won’t my iPhone connect to HomePod? Make sure that your device is updated to the latest version of iOS or iPadOS and has the Home and Music app. Make sure that your iPhone, iPad, or iPod touch is updated to the latest version of iOS or iPadOS. Also check that the Music app and Home app are installed on the device that you’re using to set up HomePod.

Best answer for this question, how do you put HomePod in pairing mode?

1. Tap the Settings app.
2. Tap About Phone or About Device.
3. Tap Status or Hardware Information.
4. Scroll down to see your Wi-Fi MAC address.

How do you tell if your Wi-Fi is 2.4 or 5?

1. Connect to the WiFi network.
2. Open your networks panel from your taskbar (click the WiFi icon in the bottom right).
3. Click on “Properties” of your WiFi network.
4. In the new window that opens, scroll all the way down to “Properties”.
5. “Network Band” will either say 2.4GHz or 5GHz.

How can I see all the devices on my network?

How do I make my HomePod discoverable?

How do I connect my HomePod to my iPhone?

1. Plug HomePod in to power.
2. Unlock your iPhone, iPad or iPod touch and hold it next to HomePod.
3. Follow the onscreen instructions to choose your HomePod settings.
4. When asked, centre HomePod in the viewfinder on your iPhone, iPad or iPod touch to complete pairing.
5. Wait for HomePod to finish setup.

How do I get HomePod on my iPhone?

1. Open your device Settings.
2. Tap your Apple ID.
3. Select iCloud.
4. Under Apps Using iCloud, choose Find My or Find My iPhone.
5. Enable it by moving the slider to green and when the pop-up appears explaining the feature, click OK when you finish reading it.

Where is the 8 digit code on HomePod?

The serial number is on the bottom of HomePod and HomePod mini.

How do I access HomePod settings?

To access HomePod settings, open the Home app, tap the Home tab, long press on the HomePod tile, and tap the Details button in the bottom right-hand corner.

Can you connect to HomePod with Bluetooth?

HomePod does support Bluetooth 5.0, but it is not able to play music from non-iOS devices using a Bluetooth connection.

Why do I see unknown devices on my network?

If you see strange devices on your network manager, it is likely that your Wi-Fi is protected using a WPA (Wi-Fi Protected Access) protocol. … If the device has an IP address then it is connected to your Wi-Fi successfully. Windows Connect Now on Windows 10 and 8 goes and does some further work.

Why does a hidden network show up?

6 Answers. All this means is that your computer sees a wireless broadcast that is not presenting a SSID. If you were to attempt to use it the first thing your connection wizard will ask for is the SSID which you would input. Then it would ask your for the security information like typical wireless connections.

How do I trace a device IP address?

1. Open the Command Prompt. First, press the Windows key and the “R” button.
2. Ping the Website You Want to Trace. Type “ping” followed by the URL of the website to get its IP.
3. Run the “Tracert” Command on the IP.
4. Put These IPs Into an IP Lookup Tool.