How to turn on sound mates airpods?

Press and hold the multi-function button on both earbuds for a few seconds until you hear prompt “ Power on”, and see blue lights flashing. 3. You will hear prompt ”Left Channel” on Left Earbud and “ Right Channel” on Right Earbud to begin pairing.

Best answer for this question, how do I turn on Soundmates Airpods? Press and hold the multifunction button on both earbuds until you hear the prompt “Power On”. You will then hear the prompt “Pairing”. You will hear 2 chimes to indicate both earbuds are ready for pairing. Activate the Bluetooth function of the pairing device and select “Tzumi SoundMates” from device list displayed.

Also, how do you use Tzumi sound mates?

1. Go to settings and then tap Connections.
2. In Connections window, press Bluetooth.
3. Under ‘Available devices’, when your Tzumi Bluetooth device appears, tap on it and then your Android device will be connected to your headphones.

Quick Answer, how do I reset my Tzumi sound mates no buttons?

1. Turn off Bluetooth on your phone.
2. Set both pods on table for 5 min to make sure they turn off.
3. Put pods back in the case.
4. Turn on Bluetooth and scan to remove any instance of tzumi.
5. Remove whichever pod was flashing red/blue.
6. Should connect.
7. Remove other pod.

Correspondingly, how do you get both Tzumi earbuds to work?

1. Press and hold BOTH earbuds until you hear the pairing Prompt in BOTH ears.
2. Select ONLY ONE Tzumi Soundmates in the Bluetooth options on the device. IF YOU SEE TWO OPTIONS YOU MAY HAVE TO REPEAT THE PROCESS OVER AGAIN.
3. Once device confirms Device Connected You should hear in both ears. Hope this helps.

1. Keep the distance between the device and the tzumi earbuds within 3 feet (for pairing only).
2. Press and hold the multi-function button on both earbuds for a few seconds until you hear prompt “Power On” or see blue lights flashing.

Why are my sound mates not pairing together?

If your Soundmates won’t pair to each other, place them back in the charging case. … Power ON: Remove your earbuds from the charging case. Power OFF: Place your earbuds back into the charging case. Reset Master Earbud: Press and hold the multifunction button on both earbuds until the LEDs flash RED and BLUE alternately.

How long do Tzumi sound mates last?

Tzumi Sound Mates : The batteries only last about 2 hours.

Are Tzumi sound mates waterproof?

Bluetooth 5.1 Headphones, Wireless Ear Buds with LED Digital Display, IPX7 Waterproof, CVC8.

How do you make both Probuds work?

Quickly press both earbuds on multi-function 3 times to enter earbuds pairing mode . Wait for two earbuds connecting for a few seconds . The blue light will flash once every 7 seconds if connected . Both earbuds are now ready for use.

How do you reset Tzumi earbuds?

To reset/change MASTER Earbud, hold multi-function button on BOTH earbuds for 6 seconds. When blue/red lights flash quickly, press multi-function button twice on the earbud you want to set as the MASTER Earbud.

How do I control the volume on my Tzumi earbuds?

1. Increase volume: Press the multi-function button 2 times consecutively, holding the button down at the second push ( ).
2. Decrease volume: Press the multi-function button 3 times consecutively, holding the button down at the third push ( ).

Why is my Airpod flashing red and blue?

The most common reason why your Bluetooth headset is flashing red and blue is it is unpaired. The headphones are looking for a connection. It’s possible you may have accidentally held down the pairing button. This puts the headphones in pairing mode, which makes the status lights blink red and blue.

How do you pair left and right earbuds?

Take the left and right earbuds out the case and long press the touch control area at the same time for about 3 seconds or until you see a white LED light flashing on both earbuds. It is very important that you long press the left and right earbud at the same time.

Why is only one of my earbuds working?

Headsets may play only in one ear depending on your audio settings. So check your audio properties and make sure that the mono option is turned off. In addition, make sure that voice levels are balanced on both earbuds. … The voice levels must be equal on both sides of your headset.

How do you fix wireless earbuds when only one works?

1. Check the side balance.
2. Check Your Track Mono Or Stereo.
3. Power off/on your headphone.
4. Reconnect Bluetooth.
5. Insert the sound cable plug while playing audio.
6. Pull out back the sound cable while playing audio.

How do I pair my Tzumi speaker?

1. Keep the distance between your device and the speaker within 3 feet (for pairing only).
2. Turn on the speaker by pressing and holding the Power Button.
3. The tone prompt will sound and the LED light will flash blue.