How to use old imac as monitor for pc?

1. Shut down the Windows PC and iMac.
2. Plug the video cable into the Mini DisplayPort connector on your PC’s video card.
3. Plug the second end of the video cable into the Mini DisplayPort connector on the back of the iMac, to the left of the Ethernet port.
4. Turn on the PC and iMac.

You asked, can you use a 2009 iMac as a monitor? 1 Answer. Yes an iMac will work as a screen for a regular PC, but only with 27″ models of Late 2009, 2010 iMacs. If those conditions are met then the iMac supports what is called Target Display Mode, aka using your iMac as a display.

Best answer for this question, can I use iMac as a monitor? You can use more than one iMac as a display, if each iMac is using a Thunderbolt cable to connect directly to a Thunderbolt port on the other Mac (not the other iMac). Press Command-F2 on the keyboard of the iMac. You should now see the desktop of the other Mac. … Or disconnect the cable, or restart either Mac.

Beside above, can I use my 2009 21 inch iMac as a monitor? iMacs released from late 2009 through mid-2014 can be used as external displays. Those that followed cannot, starting with the 27-inch 5K late-2014 edition.

Also, how do I use my 2008 iMac as a monitor for PC?

1. With both the iMac and Macbook off connect the computers with a Firewire cable.
2. Turn on the MacBook while holding the “T” key.
3. Turn on iMac while holding the Option key.
4. Press Return and iMac will start up with the MacBook System, Users, and Applications.
5. You can now close the MacBook and enjoy the “big screen”.

Unfortunately, you cannot use 24-inch iMac 4.5K Retina Display as an external monitor or target monitor. This is because the Mac before 2014, have official support to add the Target Display/External Monitor, and from 2014 or later Mac, Apple lift this support.

How can I use my iMac as a monitor without Target display Mode?

So there’s no way to use the iMac without Target Display? On your MacBook Pro, visit System Preferences : Sharing : and check Screen Sharing. On your iMac, drag and drop the Screen Sharing application from /System/Library/CoreServices/Applications to your Dock. Then click the Screen Sharing app, and enter the hostname.

Can iMac accept HDMI input?

Mac computers can use an HDMI cable or adapter to connect to an HDTV, display, or other HDMI device. … USB-C or Thunderbolt 3 (USB-C) port: Connects to HDMI using an adapter, such as the Apple USB-C Digital AV Multiport Adapter.

Can I use iMac 2021 as a monitor?

Yes, you can technically use one external monitor with the M1 iMac to turn it into a dual monitor setup. The M1 iMac supports one external monitor (up to 6K resolution with up to a 60Hz refresh rate, just like the Apple Pro Display XDR), which is different from previous non-M1 iMacs.

Can you use iMac as a monitor for PS5?

Connect your Mac and your controller using Bluetooth®. For details on Bluetooth® pairing, see “Using a wireless controller”. You can also use a USB cable. … After it connects, the screen of your PS5 console displays on your Mac and you can start using Remote Play.

Can I use my 21.5 inch iMac as a monitor?

The same Mini DisplayPort or Thunderbolt port can be used as a video input that allows your iMac to serve as a monitor for another Mac. All you need are the proper ports and cables to make the connection between the two Macs. … It can’t receive analog video or audio sources, such as those from a VGA connector.

Does iMac 2020 have Target display Mode?

Target Display Mode was dropped because the 5K iMac requires a custom timing controller to drive the display at 60Hz and TDM does not work with said controller. That hasn’t changed since 2014.

How do I connect my 2009 iMac to a monitor?

Can I use an early 2008 iMac as a monitor?

To use Target Display mode, all you have to do is connect an iMac to another DisplayPort-enabled Mac and then press Command-F2 on the iMac’s keyboard. … The new Thunderbolt-equipped Macs do support Target Display mode, but this setup will only work with other Macs that use Thunderbolt.

Can you plug a PC laptop into an iMac?

Step 1 Power off your Windows PC and iMac. Step 2 Plug one end of the compatible cable into the HDMI, Display Port, Thunderbolt port on your PC’s or Laptop. Step 3 Plug the other end of the cable to Mini DisplayPort or Thunderbolt connector on your iMac. Step 4 Power on the PC & iMac.

How do I use my iMac g5 as a external monitor?

There is no traditional way to connect it to another computer directly, for the other computer to use the iMac’s display. and the “VNC” protocol. You’re essentially doing screen sharing, but making the MacBook Pro send its “second screen” (which the app creates) to the iMac, which displays it at full screen using VNC.

Why was Target display mode removed?

Target Display Mode was an extremely popular feature that allowed older macs to be used as external monitors for newer macs. However, Apple killed off Target Display Mode a few years back because it required too many Thunderbolt ports on newer model macs.